Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (2024)

Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (1)

Hoover SPINSCRUB 50 Carpet Cleaner

Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (2)

Table of Contents

About Hoover

Today, Hoover is a part of Charlotte, North Carolina-based TTI Floor Care North America. Hoover produces high-quality, effective vacuum cleaners for use in residential and business environments. Since 1908, customers and companies have relied on Hoover to deliver dependable, cutting-edge cleaning solutions. Full-size uprights and canisters, deep cleaners, and hard-floor cleaners are just a few of the many options Hoover has to offer for regular and specialized vacuuming.

Thank you for choosing a HOOVER product
Please enter the complete model and Manufacturing Code in the spaces provided.

  • MODEL—————-
  • MFG.CODE—————-

Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (3)

Questions or concerns? For assistance, please call Customer Service at 1-800-944-9200 Mon-Fri 8am-7pm EST before returning this product to the store

THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. . . . . IF USED COMMERCIALLY WARRANTY. IS VOID. ©2012 Techtronic Floor Care Technology Limited. All rights reserved. #961151057 1D105762-R0

Hint: Attach your sales receipt to this owner’s manual. Verification of the date of purchase may be required for warranty service of your HOOVER’.Jl) product. Be sure to register your product online at Hoover.com or call 1-800-944-9200 to register by phone

If you need assistance:
Visit our website at hoover.com for more information or for video instructions for this carpet washer. Follow the authorized dealer locator link to find the Hoover~ authorized dealer nearest you or call 1-800-944-9200 for an automated referral of Hoover® trusted dealer locations (U.S. only) or to speak with a customer service representative; Mon- Fri 8 am- 7 pm EST.
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY:

  • Fully assemble before operating.
  • Operate the cleaner only at the voltage specified on a data plate on the lower handle of the cleaner.
  • Do not leave the appliance when plugged in. Unplug from the outlet when not in use and before cleaning or servicing.
  • Use indoors only.
  • Do not immerse. Use only on carpet moistened by the cleaning process.
  • Use only HOOVER® cleaning products intended for use with this machine. (See the “Cleaning Products” section of this manual.)
  • Do not allow it to be used as a toy. Not intended for use by children aged 12 and under. Close supervision is necessary when used near children. To avoid injury or damage, keep children away from the product, and do not allow children to place fingers or other objects into any openings.
  • Use only as described in this manual. Use only the manufacturer’s recommended attachments and products.
  • Do not use a damaged cord or plug. If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a service center prior to continuing use.
  • Do not pull or carry by cord, use the cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not place the product on the cord. Do not run the appliance over the cord. Keep the cord away from heated surfaces.
  • Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
  • Do not handle plugs or appliances with wet hands.
  • Do not put any objects into openings. Do not use any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
  • Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
  • Turn off all controls before unplugging.
  • Use extra care when cleaning on stairs. To avoid personal injury or damage, and to
    prevent the cleaner from falling, always place the cleaner at bottom of stairs or on the floor.
    Do not place cleaner on stairs or furniture, as it may result in injury or damage.
  • Do not use to pick up flammable or combustible materials, such as gasoline, fine wood sandings, or use in areas where they may be present.
  • Connect to a properly grounded outlet only. See Grounding Instructions.
  • Unplug before connecting SpinScrub® Hand Tool.
  • Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
  • Do not use without Tanks or Filters in place.
  • Do not clean over-floor electrical outlets.
  • WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects or reproductive harm. WASH HANDS AFTER HANDLING

CAUTION- TO REDUCE THE RISK OF DAMAGE:

  • Avoid picking up hard, sharp objects with this product, as they may cause damage.
  • Store appropriately indoors in a dry place. Do not expose machine to freezing temperatures.
  • Do not use sharp objects to clean out the hose as they can cause damage.
  • To assist in reducing drying time, be certain the area is well-ventilated when using detergents and other cleaners with this machine.
  • To help prevent matting and re-soiling, avoid contact with carpets until they are dry. Keep children and pets away from carpets
  • until they are completely dry.
  • Do not store extractor with solution in tanks.
  • With brushes on, do not allow cleaners to sit in one location for an extended period of time, as damage to the floor can result.
  • Do not use this extractor and accessories on hard floors. Using this machine on hard floors without proper attachment may scratch or damage your floor.
  • Water will drip from the brushes and underside of the product after use and may puddle. To avoid damage to wood and laminate flooring and to avoid potential slip hazard, after use (a) do not leave product on wood and laminate surfaces and remove to a hard surface and (b) place the unit on absorbent material (such as a towel) to soak up drips.

GROUNDING INSTRUCTIONS

This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor (C) and grounding plug (A). The plug must be inserted into an appropriate outlet (B) that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING: Improper connection of the equipment-grounding conductor can result in the risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a qualified electrician. This appliance is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug (A) illustrated in Fig. 1. A temporary adapter (D) may be used to connect this plug toa 2-pole receptacle (E) if a properly grounded outlet is not available (Fig. 2). Thetemporary adapter should be used only until a properly grounded outlet (B) can be installed by a qualified electrician (Fig. 1). The green colored rigid ear, lug, or the like (F) extending from the adapter must be connected to a permanent ground(G) such as a properly grounded outlet box cover (Fig. 2). Whenever the adapter is used, it must be held in place by a metal screw. NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian Electrical Code.Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (4)

CARTON CONTENTS

REMOVE ALL PARTS FROM CARTON AND IDENTIFY EACH ITEM SHOWN. MAKE SURE ALL PARTS ARE LOCATED BEFORE DISPOSING OF PACKING MATERIALS.

Available on select models only. Accessories not included with your model may be purchased separately by visiting hoover.com.Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (5)

  • A. Carpet Washer
  • B. Water/Solution Tank
  • C. Upper Handle
  • D. Handle Screws
  • E. SpinScrub® Brush Assembly (Pre-assembled in unit)
  • F. SpinScrub® Hand Tool*
  • G. Mesh Tool Storage Bag*Tools Included in Mesh Bag
  • H. Accessory Hose
  • I. Stair Tool*
  • J. Upholstery Tool
  • K. Crevice To

HOW TO ASSEMBLE

NOTE: PHILLIPS SCREWDRIVER NEEDED FOR ASSEMBLYHoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (6)

ATTACH HANDLE

  1. Position the upper handle and slide down into carpet washer base (Fig. 2)
  2. Insert both screws and tighten with a screwdriver (Fig. 3). PLACE SOLUTION/ WATER TANK
  3. Position the bottom of the tank onto Carpet Washer(Fig. 4).
  4. Push tank handle while supporting back of cleaner with another hand until Solution Tankclicks into place (Fig. 5).
  5. Check to make sure tank is securely latched.
    STORE TOOLS
  6. Place tools and hose into Mesh Tool Storage bag provided.
  7. Mesh Tool Storage Bag should not be hung on the Carpet Washer while the Carpet Washer is in use.
  8. Mesh Tool Storage Bag can be conveniently stored either on the back of the unit or hung elsewhere by the provided hook (Fig. 6).
    CORD STORAGE
  9. Wrap cord around cord hooks for convenient storage. Attach the plug end to cord

FEATURESHoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (7)

LIST OF FEATURES

  1. Solution Trigger: Press to release cleaning solution
  2. ON/OFF Pedal
  3. Wash/Rinse Selector
  4. Clean Water/Solution Tank
  5. Dirty Water Tank
  6. Dirty Water Tank Latch
  7. Solution Tube Connection Port
  8. Nozzle
  9. Accessory Hose Connection Port
  10. Cord Storage Hook
  11. Cord Storage Hook (Does not rotate)
  12. Handle Release Pedal
  13. Cord Clip

HOW TO USEHoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (8)

ON-OFF PEDAL (Fig. 13, A)

  1. To turn the cleaner ON, step on the pedal.
  2. To turn the cleaner OFF, step on pedal agian.

HANDLE RELEASE PEDAL

  1. Grasp handle.
  2. Step on Handle Release Pedal to release lower handle to operating position.
  3. Do not release grip on handle until handle is returned into locked upright position

TRANSPORTING

  1. To move your cleaner from room to room, put handle in upright and tocked position.
  2. Tilt cleaner back on wheels and push forward(Fig. 14).

CARRY HANDLES

The carpet washer may also be lifted by any of several carry handles as shown. Be sure tanks are properly latched in place before attempting to lift(Fig 15).

  • A. Upper Handle
  • B. Solution Tank Handle
  • C. Dirty Water Tank Handle
  • D. Solution Tank Shelf

CLEAN WATER/SOLUTION TANK

The Clean Water I Solution Tank (Fig. 16) is divided into two sections. The Clean Water Tank (E) is for water only and the Solution Tank (F) is for cleaning solution only.
NOTE: Tanks are labeled above tank caps.

How to FmHoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (9)

  1. Tum off and unplug cleaner from electrical outlet
  2. To remove tank, press down on Solution TankLatch and pull forward.
  3. Fill Clean Water Tank (Fig. 18) with hot tap water. The use of hot water as opposed to cold, significantly improves cleaning performance
  4. Fill Solution Tank (Fig. 19) with Hoover®Clean Plus 2X Solution or any other hooversolution “Cleaning Solutions” page 19 for details). Replace container caps and tighten.Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (10)
  5. Place Solution/Water Tank back on to the unit using the method described on page 6.
    Actual model may vary from images shown.

NOTE: There may be a small amount of water on the base when the tank is removed from the unit. This is a normal condition.

DIRTY WATER TANK

The Dirty Water Tank holds the dirty water that is picked up from the surface being cleaned. When the Dirty Water Tank is full, the automatic shut-off will engage, suction will stop and the tank must be emptied (see Automatic Shut-Off section).

How to EmptyHoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (11)

  1. Turn cleaner off and unplug from electrical! outlet.
  2. Release Dirty Water Tank Latch (Fig. 20).
  3. Grab the Dirty Water Tank Handle and remove from carpet washer (Fig. 21).
  4. Unplug the Quick Spout Pour Cap (A), rotate it away from drain hole and empty the Tank (Fig. 22).
  5. Place Recovery Tank back on to cleaner making sure to do so with the retaining features (B, Fig. 23) pointing down to ensure proper sealing.
  6. Latch the Recovery Tank back into placeHoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (12)

How to Clean

  1. Empty Dirty Water Tank.
  2. Place on flat surface and unlatch Dirty Water Tank lid latch located below the Quick SpoutPour Cap (Fig. 24).Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (13)
  3. Pivot and lift off Dirty Water Tank Lid (Fig. 25).
  4. Remove lint from filter screen located on the bottom of the Dirty Water Tank Lid (C, Fig. 25).
  5. Rinse debris from Dirty Water Tank Lid and DirtyWater Tank bottom (Fig. 26).
  6. Insert tabs on Dirty Water Tank lid and reattached to Dirty Water Tank bottom (D, Fig. 27a).
  7. Reattach Recovery Tank Lid Latch.Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (14)

AUTOMATIC SHUT OFF

  • When the Dirty Water Tank is full the yellow float disk will rise and shut off the carpet washer’s suction. The carpet washer will no longer pick up dirty water and the motor sound will become noticeably higher in pitch.
  • When this happens, turn carpet washer off and empty Dirty Water Tank before continuing use.
  • Check Clean Water/Solution Tank also; it may need to be refilled.
  • Do not use without float and float retainer in place.
    If broken or dislodged, take it to an Authorized Dealer for repair.
  • Actual model may vary from images shown.

HOW TO CLEAN

BEFORE YOU BEGIN CLEANING

  1. Vacuum thoroughly – For carpet, use a HOOVER®vacuum cleaner with an agitator for best results. Vacuum upholstery with a vacuum cleaner with cleaning toot attachments. Use a crevice tool to reach into tufts and folds. Do not use the carpet cleaner as a dry vacuum cleaner.
  2. For upholstery, check cleaning code – Use your HOOVER® carpet washer only if the upholstery fabric is marked with a ‘W” (for “wet” clean) or “S/W”{for “solvent/dry” or ”wet” clean). Do not clean fabric marked “S” (“solvent/dry” clean only). If your upholstery does not have a code, seek professional assistance.
  3. Test for colorfastness – Wet a white absorbent cloth with the solution. In a small, hidden area, gently rub the surface with the dampened cloth. Wait ten minutes and check for color removal or bleed with white paper towel or cloth. If surface has more than one color, check all colors
  4. When cleaning entire floor, move furniture out of area to be cleaned (may not be necessary if only high traffic areas are to be cleaned). For furniture too heavy to move, place aluminum foil or wax paper under legs. This will wood finish from staining carpet. Pin up furniture skirts and draperies.
  5. Pretreat spots and heavy traffic areas with an appropriate Hoover Cleaning Solutions, see”Cleaning Solutions” section. Follow Directions on bottle.
    Available at additional cost if not included with your model.
  6. To prevent staining, use plastic or aluminum foil to protect wood or metal surfaces from possible water spray.
  7. To avoid wetting and possible damage to wood floors underneath area rugs/carpet, either move area rugs/ carpet to a non-wood hard floor surface or place waterproof material (e.g. plastic) underneath them before cleaning.

WASHING CARPET

Read “Before You Begin Cleaning” instructions.Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (15)

  1. Fill Clean Water Tank according to instructions
  2. Fill solution tank with Hoover® solution according to instructions.
  3. Dry hands and plug cord into a properly grounded
  4. NOTE: To avoid walking on damp carpet, start at the end of the room farthest from the door or path to the sink where tanks will be emptied and filled.
  5. Step on handle release pedal and lower handle to operating position.
    Step 1
  6. Set Wash/Rinse Selector to Wash (Fig. 28) Turn cleaner ON.
  7. Squeeze trigger to apply cleaning solution and slowly push cleaner forward (equals one wet stroke) {Fig. 29).Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (16)
  8. Continue to squeeze trigger and slowly pull cleaner back toward you (second wet stroke
    Step 2
  9. Release trigger and slowly push cleaner forward over area just sprayed with solution(dry stroke). Then slowly pull the cleaner back toward you without squeezing trigger (drystroke). Continue using dry strokes until little water is visible passing through the Dirty Water
    Tank lid (Pass over the same area a minimum of 4 times = 2 while squeezing the trigger and 2 without).
    NOTE: For best results, use straight, parallel strokes. Overlap strokes by 1 inch to help prevent streaking.
  10. Keep nozzle flat on floor for both forward and reverse strokes.
    For best cleaning results and to aid in faster drying of carpet, end with more dry strokes. (Continue using dry strokes until little water is visible passing through the Dirty Water Tank lid.)Empty Dirty Water Tank when the motor sound becomes higher pitched and there is a loss in suction (see “Automatic shut-off”). When finished cleaning, follow the “After Cleaning” instructions
  11. For best cleaning results, Hoover recommends to rinse the carpet with water only. This will remove the residual carpet cleaning solution from your carpets. To Rinse with water only, setWash/Rinse Selector to rinse (Fig. 30) and repeat steps 7 and 8.Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (17)
  12. For heavily soiled areas, repeat cleaning process. Avoid saturating carpet.
    NOTE: It is best to alternate wet and dry strokes as described above.

AFTER USE

Allow carpet or upholstery to dry. To help prevent matting and re-soiling the carpet, keep children and pets away from the surface until it is completely dry. If it is necessary to walk on damp carpet, place towels or white cloths in the traffic areas. If furniture must be replaced before the carpet is dry, place plastic or aluminum foil under legs of the furniture so metal slides or wood finishes will not stain the carpet.

Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (18)

  1. See “Dirty Water Tank: How to Empty” page 9.
  2. See “Dirty Water Tank: How to Clean” page 9.
    NOTE: Let Dirty Water Tank and Dirty Water Tank
    Lid air dry before Carpet Washer is stored.
  3. See “Cleaning Nozzle”
  4. See “Cleaning Brushes”
  5. Remove lint from filter screen located behind nozzle.

TOOLS

CONNECT HOSE FOR TOOL USE

How to Attach

  1. Open Accessory Hose Suction Port (A, Fig. 31 ). Insert hose end, aligning the indicator with the unlock arrows.
  2. Rotate clockwise to lock position (B, Fig. 31 ).Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (19)
  3. Hold open the Accessory Hose Solution Port door (Fig. 32).
  4. Plug Accessory Hose Solution Tube connector firmly into Hose Solution Port (C, Fig. 32).

How to Remove

  1. Disconnect Accessory Hose Solution Tube Connector from Accessory Hose Solution Port by pulling it up firmly. Do not pull on tube, this may cause damage. Accessory port door will automatically close.
  2. Rotate the accessory Hose end counterclockwise from the locked position to the unlocked position and remove by pulling out.
  3. Snap Accessory Hose Suction Port door back into place. Make sure to snap both sides to ensure proper suction, the unit may lose suction if not closed properly.

TOOLS (*Available on select models only.)Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (20)

  • Stair Tool*: 6 inches wide, 2 built-in rows of brushes to help provide the scrubbing action that some spots may need for removal on your carpeted stairs.
  • Upholstery Tool has a built-in brush to help provide the scrubbing action some spots may need removal.
  • Spin Scrub”’ Hand Tool* has rotating brush(s)tor extra scrubbing action on small carpet areas, carpeted stairs and upholstery.
  • For some models, the brush(s) can be removed for converting to the scrub module. D
  • Crevice Tool*: Great for use around baseboard sand those hard-to-reach areas.
    NOTE: Tools located and stored in Mesh Bag.

How to Attach Tools

  1. To ensure maximum performance and to protect your carpet, be sure to place the handle in the upright position while using the accessory hose. Placing the handle in the upright position shuts off the SpinScrub brushes.
    NOTE: All tools attach to the hose in the same manner:
  2. Connect tool to hose by sliding it onto connector until the tab locks it securely Fig. 34).Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (21)
  3. Using your thumb, push forward and up on the latch to remove tool (F, Fig. 34).

After Using Tool

  1. Drain suction hose by turning cleaner ON and holding nozzle up for several minutes. Do not press trigger.
  2. Disconnect hose and solution tube from cleaner.
  3. Drain solution tube by placing round end in sink and raising the trigger end at the hose nozzle above your head (Fig. 35). Press the trigger tore lease air and fluid.Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (22)
  4. Replace Hose and tools in the Mesh Storage Bag.

CLEANING CARPETED STAIRSHoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (23)

  1. Read the “Before You Begin Cleaning” instructions
  2. Attach hose and solution tube as instructed
  3. Place handle in upright position. Spin Scrub brushes will not rotate while handle is in up right position.
  4. Fill Clean Water Tank according to instructions.
  5. Fill Solution Tank with HOOVER _ solution according to instructions.
  6. Attach too! to end of ho
  7. Dry hands and plug cleaner into a properly grounded outlet.
  8. Set Wash/ Rinse Selection to WASH. Turn cleaner ON.
  9. Pre-spray the carpeted stair by holding the toolabout one inch above the carpet and push it forward while pressing the trigger (equals one wet stroke) (Fig. 37).
  10. Position tool against the riser and slightly press it into carpet pile. Press the trigger and pull thetool slowly over the carpet (second wet stroke).Release trigger at end of stroke.
  11. Lift tool, and position it against the riser. Pull tool slowly over carpet without pressing trigger (dry stroke) (Fig. 38).
  12. Overlap strokes by 1/2 inch to help prevent streaking.
  13. 1t is best to alternate wet and dry strokes as described above. End with more dry strokes to aid in faster drying of carpet.
  14. To avoid saturating carpet, do not use more than4 wet strokes over any one area. Always end with dry strokes.
  15. If additional cleaning is necessary, wait until the carpet is completely dry before using the tool again.
  16. Empty Dirty Water Tank when the motor sound becomes higher pitched and there is a loss in suction (see “Automatic Shut-Off”).
  17. When finished cleaning, follow the “After Cleaning” and “After Using Tool” instructions.

CLEANING UPHOLSTERY

Read the “Before You Begin Cleaning” instructions. Be sure to check Hoover Cleaning Guide on page 10 and the cleaning code on your upholstery. Use your cleaner only on upholstery marked “W” or”W/S”.

  1. Attach hose and solution tube as instructed.
  2. Place handle in upright position. Spin Scrub brushes will not rotate while handle is in upright position.
  3. Fill Clean Water Tank according to instructions
  4. Fill solution container with HOOVER _solution according to instructions on. Do not use hard floor cleaning solutions when cleaning upholstery.
  5. Attach tool to end of hose.
  6. Dry hands and plug cleaner into a properly grounded outlet.
  7. Set Wash/Rinse Selector to WASH. Turn cleaner ON.
  8. Gently press the tool onto the fabric. Press the trigger and slowly pull the nozzle over thefabric (Fig. 39).Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (24)
  9. Overlap strokes by 1/2 inch to help prevent streaking.
  10. Make additional strokes without pressing the trigger to remove more solutions. To clean in corners or creases, lift the tool one-half inch from the fabric and press the solution trigger.
  11. For heavily soiled areas, it may be necessary to repeat the cleaning process. Make crisscrossing strokes to the original pattern; overlap each pass (Fig. 40). Make no more than 2 passes with the solution over any one area to prevent over-wetting and damage to the fabric.
  12. If you would like to rinse the carpet with water only, set Wash/Rinse Setting switch to RINSE(Fig. 4t). For best cleaning results, Hoover recommends rinsing the carpet with water only. This will remove the residual carpet cleaning solution from your carpets.Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (25)

Then set Wash

  1. Rinse Selector to rinse and repeat steps 7 and 8.
  2. If additional cleaning is necessary, wait until the upholstery is completely dry before using the tool again.
  3. Empty Dirty Water Tank when the motor sound becomes higher pitched and there is a loss in suction (see “Automatic Shut-Off”).
    When finished cleaning, follow the “After Cleaning” and “After Using Too!” instructions.

MAINTAINANCE

Familiarize yourself with these home maintenance tasks as proper use and care of your cleaner will ensure continued cleaning effectiveness. An authorized service representative should do any other servicing. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water take it to a service center prior to continuing use.

NOZZLE: How to Clean
If lint or other debris becomes lodged in the nozzle, it can be removed for cleaning.

  1. To prevent possible leaking, remove Clean Water Tank and Dirty Water Tank.
  2. With handle in upright position, tilt carpet washer back so that handle rests on the floor.
  3. Rotate nozzle latch to unlock position (Fig. 41).Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (26)
  4. Pull up on nozzle slightly to unsnap nozzle from foot of carpet washer.
  5. Pull nozzle forward to remove from carpet washer. Be sure the nozzle does not get caught on retention tank latch (Fig. 42).
  6. Rinse debris from nozzle.
  7. Position nozzle on to foot, making sure to align the tabs at the bottom of the nozzle with the notches on the foot (Fig. 43).
  8. Snap nozzle to foot.
  9. Rotate nozzle latch to lock position.

BRUSHES: How to Change and Clean
Your cleaner is equipped with removable brushes. Follow these directions for changing brush assemblies or for easy cleaning.

HOW to Remove

  1. To prevent possible leaking, remove Clean Water Tank and Dirty Water Tank.
  2. With handle in upright position, tilt cleaner back until handle rests on the floor.
  3. Grab brush assembly and pull firmly (Fig. 44).
  4. The brushes can be cleaned under running water

How to Replace

  1. Align posts (A) on both ends of brush assemblywith slots (B) in cleaner housing (Fig. 44).Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (27)
  2. Make sure that the hexagonal post (C) also aligns with the hexagonal hole (D). Turn brushes slightly until post fits easily into hole.
  3. Press brush assembly firmly to snap into place.

STORAGE

Before storing:

  • Empty Clean Water Tank and let air dry. Replace on cleaner.
  • Empty Dirty Water Tank, rinse tank and lid thoroughly with clean water and let air dry.
    Allow brushes and undersides of carpet cleaner to air dry thoroughly before storing carpet cleaner on a carpeted or wood surface.

LUBRICATION
The motor is equipped with bearings that contain sufficient lubrication for the life of the motor. The addition of lubricant could cause damage. Therefore, do not add lubricant to motor bearings.

SERVICE

To obtain approved Hoover® service and genuine Hoover parts, locate the nearest Authorized Hoover'”‘

Warranty Service Dealer (Depot) by:

  • Checking the Yellow Pages under “Vacuum Cleaners” or “Household”
  • Visit our website at hoover.com (U.S. Customers) or hoover.ca (Canadian customers).
    Follow the service center link to find the service outlet nearest you.
  • For an automated referral of authorized service outlet locations call 1-800-944-9200.
    Do not send your vacuum to Hoover”, Inc., Company in Glenwillow for service. This will only result in delay.

If you need further assistance:

  • To speak with a customer service representative call 1-800-944-9200; Mon-Fri 8am-7pm EST. In Canada, contact Hoover® Canada, Toronto: 755 Progress Ave., Scarborough, ON M1H 2W7 OR Hoover Canada,
  • Edmonton: 18129-111 Ave., Edmonton. AB T5W 2P2, Phone: 1-800-944-9200, Mon-Fri 8am-7pm EST.
  • Always identify your vacuum by the complete model number when requesting information or ordering parts. (The model number appears on the bottom of the vacuum.)

PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.

TROUBLESHOOTING

If a minor problem occurs, it can usually be solved quite easily when the cause is found using the checklist below. Any other servicing should be done by an authorized service representative. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a service center prior to continuing use.

PROBLEMPOSSIBLE CAUSEPOSSIBLE SOLUTION
Cleaner won’t run.1. Not firmly plugged in.

2. No voltage in wall plug.

3. Blown fuse or tripped breaker.

4. Fuse in cleaner blown.

1. Plug unit in firmly.

2. Check fuse or breaker in home.

3. Replace fuse or reset breaker in home.

4. Take to service center.

Low suction.1. Dirty Water Tank full/ automatic shut off engaged.1.Remove and empty Dirty Water Tank. See “How to Empty” page 9.
2. Blockage In tool on end of hose.2. Remove tool and clear blockage.
3. Dirty Water Tank lid not on correctly.3. Make sure lid is on securely. See “How to Use” on page 9.
4. Dirty Water Tank Debris Filter Clogged.4. See “How to Clean” page 5.
5. Blockage in nozzle.5. See “How to Clean” page 15.
6. Recovery Tank not properly secured.6. Replace Recovoery Tank as per instructions on page 9.
Hose nozzle stops

spraying liquid during use.

1. Clean Water Tank or Detergent Container is empty.1. Turn off cleaner and fill Clean Water Tank and Detergent Container.
Hose nozzle will1. Air is trapped in the pump1. Turn on the cleaner. If hose does not spray,
not spray afterand hose.prime the pump by lowering the hose down to
filling the Cleanthe floor and hold the trigger for up to 1 minute.
Water Tank or
Detergent Con-
tainer.
Hose nozzle will

not spray after priming pump.

1. Pump is defective.1. Call for service: 1-800-944-9200
Clean water won’t dispense.1. Clean Water Tank not firmly in place.1. Make sure tank is securely locked in position.
2. Clean Water Tank or solution container empty.2. Refill container according to instructions for surface being cleaned.
Solution won’t dispense1. Mode knob is in “Rinse Mode”.1. Turn Knob to “Wash”.
Brushes won’t

rotate during floor cleaning.

1. Dirty filter screen on front of unit behind nozzle.1. Clean screen.

CLEANING SOLUTIONS

WARNING: To reduce the risk of fire and electric shock due to internal component damage, use only Hoover® cleaning products intended for use with the appliance as noted below.Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (28)

WARRANTY

LIMITED TWO YEAR WARRANTY (Domestic Use)

WHAT THIS WARRANTY COVERS

When used and maintained in normal household use and in accordance with the Owner’s Manual, your HOOVER® product is warranted against original defects in material and workmanship for a full two year from date of purchase (the “Warranty period”). During the Warranty Period, Hoover® will provide labor and parts, at no cost to you, to correct any such defect in products purchased in the United States, U.S. Military Exchanges and Canada

HOW TO MAKE A WARRANTY CLAIM

If this product is not as warranted, take or send the product to either a Hoover Sales and Service Center or Hoover” Authorized Warranty ServiceDealer along with proof of purchase. For an automated referral to authorized service outlets in the U.S.A., phone: 1-800-944-9200 OR visit Hoover5 online at www.hoover.com. For additional assistance or information concerning this warranty or the availability of warranty service outlets, phone the Hoover”‘ Consumer Response Center, Phone 1-800-944-9200, Mon-Fri 8 am-7 pm EST. In Canada, contact HooverCanada, Carson Building, 100 Carson St., Etobico*ke, Ontario MSW 3R9, Phone: 1-800-944-9200, Mon-Fri 8am-7pm EST

WHAT THIS WARRANTY DOES NOT COVER

This Warranty does not cover: use of the product in a commercial operation (such as maid, janitorial, and equipment rental services), improper maintenance of the product, damage due to misuse, acts of God, nature, vandalism, or other acts beyond the control of Hoover®, owner’s acts or omissions, use outside the country in which the product was initially purchased and resales of the product by the original owner.

This warranty does not cover pick-up, delivery, transportation or house calls. However, if you mail your product to a Hoover Sales and Service Center for warranty service, cost of shipping will be paid one way. This warranty does not apply to products purchased outside the United States, including its territories and possessions, outside a U.S. Military Exchange and outside of Canada. This warranty does not cover products purchased from a party that is not an authorized retailer, dealer, or distributor of Hoover’s products.

OTHER IMPORTANT TERMS

This Warranty is not transferable and may not be assigned. This Warranty shall be governed and construed under the laws of the state of Ohio. The Warranty Period will not be extended by any replacement or repair performed under this Warranty.

THIS WARRANTY IS THE EXCLUSIVE WARRANTY AND REMEDY PROVIDED BY BY HOOVER'”. ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ARE DISCLAIMED. IN NO EVENT WILL HOOVER” BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND OR NATURE TO THE OWNER OR ANY PARTY CLAIMING THROUGH THE OWNER, WHETHER BASED IN CONTRACT, NEGLIGENCE, TORT, OR STRICT PRODUCTS LIABILITY OR ARISING FROM ANY CAUSE WHATSOEVER.
Some states do not allow the exclusion of consequential damages, so the above exclusion may not apply to you. This warranty gives you specific rights; you may also have others that vary from state to state.

FAQs Hoover SPINSCRUB 50 Carpet Cleaner

After using Hoover Power Scrub, how long does it take for carpet to dry?

Your carpets will dry quickly in the quick clean mode—less than 45 minutes! Deep Clean Mode: Lifts and gets rid of stains and deep filth. Wash/Rinse Mode: To get rid of any remaining solution.

What cleaning agent is compatible with Hoover Power Scrub?

A few drops of tea tree oil are added to a 50/50 solution of white vinegar and water to enhance the aroma, despite the fact that Hoover naturally recommends their own detergent. This has been quite effective for us and is affordable.

The water in a Hoover Power Scrub is heated?

The water itself is not heated by the Hoover Power Scrub Deluxe Carpet Cleaner. Please add hot tap water to the clean water tank. Using hot water instead of cold enhances cleaning results greatly.

What is the distinction between the Hoover Power Scrub’s wash and rinse options?

When you choose “Wash,” you can mix water and cleaning solution; when you choose “Rinse,” you can just spray water.

If you don’t vacuum after using carpet cleaner, what happens?

If you don’t vacuum your carpet, the dirt will cause the fibres to deteriorate and will serve as a haven for bacteria and dust mites. In addition, the dirt, mites, and other organisms that settle into the fibres will cause your house to start to smell musty.

How frequently should carpet be vacuumed?

Home experts advise vacuuming carpets and rugs at least twice a week, and more frequently in areas with high traffic. Daily vacuuming is strongly advised if there are pets in the house to get rid of dust, hair, dander, and other microscopic allergens that are difficult to see.

Can you wash a Hoover’s interior?

Remove the canister and unplug the vacuum. With a dry microfiber cloth, clean the inside of the canister. In the sink, use warm, soapy water to clean the canister. Remove all soap suds by rinsing.

Is there a belt on a Hoover Power Scrub?

The gearing method used by Hoover makes sure that there aren’t any belts to wear out, break, or replace. An 8′ hose, a crevice tool, and two upholstery nozzles are provided for cleaning stairs, upholstery, cars, and even mattresses.

In my Hoover carpet cleaner, can I use vinegar and water?

The quick answer is that vinegar should not be used to clean carpets. Although vinegar can be used to naturally cleanse surfaces and clean them, it cannot eliminate dirt or soil from them or from carpet.

What function does vacuuming serve?

Regular vacuuming removes soil and debris that could harm carpet fibre and shorten the carpet’s useful life. Increasing the carpet’s lifespan will also increase its sustainability.

For Hoover Manuals visit ManualsDock

[embeddoc url=”https://manualsdock.com/wp-content/uploads/2023/02/Hoover-SPINSCRUB-50-Carpet-Cleaner..pdf” download=”all”]

Hoover SPINSCRUB 50 Carpet Cleaner Owner's Manual - ManualsDock (2024)
Top Articles
Latest Posts
Article information

Author: Otha Schamberger

Last Updated:

Views: 5695

Rating: 4.4 / 5 (75 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Otha Schamberger

Birthday: 1999-08-15

Address: Suite 490 606 Hammes Ferry, Carterhaven, IL 62290

Phone: +8557035444877

Job: Forward IT Agent

Hobby: Fishing, Flying, Jewelry making, Digital arts, Sand art, Parkour, tabletop games

Introduction: My name is Otha Schamberger, I am a vast, good, healthy, cheerful, energetic, gorgeous, magnificent person who loves writing and wants to share my knowledge and understanding with you.